valves, valves aron, valves brevini fluid power, valves brevini hydraulics, valves hydr-app, valves ksb, valves mondeo
Search Products  
Quick Search: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
 
The wide range of its products widely satisfy all the market’s needs in various market sectors; just one supplier to satisfy large and various operative and productive demands. Browse through our detailed list of industrial products and services to access companies within these and many other categories. Call us +39 080.5367090
 
Marks
Product Categories
valves
vr.. 
single-acting check valves type vr.., allow free fluid flow in one direction while blocking in the opposite direction, ensuring at the same time no blow-by thanks to a guided conical shutter. Inquire Now › 
a.66… 
this is modular assembly on/off solenoid valve which, by fitting suitable 2 way regulator, allows two speed operation in the same system via an electrical changeover command. Inquire Now › 
a.88… 
this is a modular assembly on/off solenoid valve which, by fitting a suitable 2 way regulator, allows two speed operation in the same system via an electrical changeover command. Inquire Now › 
ad.3.i 
these automatic reciprocating valves, with interface uni iso 4401 - 03 - 02 - 0 - 94 standard (ex cetop r 35 h 4.2-4-03), reverse the movement of an actuator every time the flow through the valve stops. Inquire Now › 
ad.3.i 
these automatic reciprocating valves, with interface uni iso 4401 - 03 - 02 - 0 - 94 standard (ex cetop r 35 h 4.2-4-03), reverse the movement of an actuator every time the flow through the valve stops. Inquire Now › 
ad.3.ri 
this valve type is characterized by fully hydraulic operation, as it takes advantage of the system pressure rise to cause an automatic and continuous inversion of the utilization. Inquire Now › 
ad.3.ri 
this valve type is characterized by fully hydraulic operation, as it takes advantage of the system pressure rise to cause an automatic and continuous inversion of the utilization. Inquire Now › 
ad.5.i… 
the operating principle of this type of inverter valve, with interface uni iso 4401 - 05 - 04 - 0 - 94 standard (ex cetop r 35 h 4.2-4-05), Inquire Now › 
ad.5.i… 
the operating principle of this type of inverter valve, with interface uni iso 4401 - 05 - 04 - 0 - 94 standard (ex cetop r 35 h 4.2-4-05), Inquire Now › 
ad.5.ri 
this valve type is characterized by a fully hydraulic operation, as it takes advantage of the system pressure rise to cause an automatic and continuous inversion of the utilization. Inquire Now › 
ad.5.ri 
this valve type is characterized by a fully hydraulic operation, as it takes advantage of the system pressure rise to cause an automatic and continuous inversion of the utilization. Inquire Now › 
adh.5 
type adh.5 distributors are intended for interrupting, inserting and diverting a hydraulic system flow. normally these distributors are composed of a main stage, crossed by circuit main flow, and of a pilot stage available in several versions. Inquire Now › 
adh.5 
type adh.5 distributors are intended for interrupting, inserting and diverting a hydraulic system flow. normally these distributors are composed of a main stage, crossed by circuit main flow, and of a pilot stage available in several versions. Inquire Now › 
adh.7 
type adh.7 distributors are intended for interrupting, inserting and diverting a hydraulic system flow. normally these distributors are composed of a main stage, crossed by the circuit main flow, and of a pilot stage available in several versions. Inquire Now › 
adh.7 
type adh.7 distributors are intended for interrupting, inserting and diverting a hydraulic system flow. normally these distributors are composed of a main stage, crossed by the circuit main flow, and of a pilot stage available in several versions. Inquire Now › 
adh.8 
type adh.8 distributors are intended for interrupting, inserting and diverting a hydraulics system flow.normally these distributors are composed of a main stage, crossed by circuit main flow, and of a pilot stage available in several versions. Inquire Now › 
adh.8 
type adh.8 distributors are intended for interrupting, inserting and diverting a hydraulics system flow.normally these distributors are composed of a main stage, crossed by circuit main flow, and of a pilot stage available in several versions. Inquire Now › 
adl06.6… 
the 6 way flow diversion valves are special solenoid valves which allow the simultaneous connection of two systems. Inquire Now › 
adl10.6 
the 6 way flow diversion valves are special solenoid valves which allow the simultaneous connection of two systems. Inquire Now › 
adph.5 
these adph 5 valves are used primarily for controlling the starting, stopping and direction of fluid flow. these kind of distributors are composed by a main stage crossed by the big flow from the pump (adph.5) and by a cetop 2 pilot directional solenoid valve (ad.2.e) available with different mounting type Inquire Now › 
adph.5 
these adph 5 valves are used primarily for controlling the starting, stopping and direction of fluid flow. these kind of distributors are composed by a main stage crossed by the big flow from the pump (adph.5) and by a cetop 2 pilot directional solenoid valve (ad.2.e) available with different mounting type Inquire Now › 
akg-a/akgs-a 
Inquire Now › 
akr/akrs 
Inquire Now › 
am.2.qf 
am.2.qf type one way non-compensated throttle valves are adjustable by means of a grub screw. Inquire Now › 
am.2.ud  
am.2.ud type modular check valves allow one way free flow, while preventing any flow in the opposite direction by means of a conical seated poppet. Inquire Now › 
am.2.up 
am.2.up type modular check valves allow one way free flow by raising a conical shutter, while in the opposite direction the fluid can return by means of a small piston piloted by the pressure in the other line. Inquire Now › 
am.2.vm  
am.2.vm type pressure regulating valves are available with an operating pressure range of 4 to 250 bar. adjustment is via a grub screw. Inquire Now › 
am.3.h 
the 2 or 3 way pressure regulator type am.3.h ensure the constant set flow rate in the presence of varying system load (pressure) by keeping constant the pressure drop (dp = 4/8 bar) in relation to the flow rate regulation. Inquire Now › 
am.3.qf 
am.3.qf type one way non-compensated throttle valve are fitted with an o-ring mounting plate which allows its assembly for either input or output regulation. Inquire Now › 
am.3.rgt… 
this modular valve produces a regenerative system to increase the actuator (differential cylinder) exit speed as shown in the diagram. Inquire Now › 
am.3.sh.. 
modular valves type am.3.sh are actuator load pressure selecting units, as they are fitted with an integral shuttle valve cartridge which allows taking of the highest pressure signal to the external port via displacement of a ball. Inquire Now › 
am.3.ud  
am.3.ud type modular check valves allow one way free flow, while flow in the opposite direction is prevented by means of a conical seated poppet. Inquire Now › 
am.3.up  
am.3.up type modular check valves allow free flow in one direction by raising a conical seated poppet valve, while in the opposite direction the fluid can return by means of a small piston piloted by the other line pressure (piloted side). Inquire Now › 
am.3.vm  
am.3.vm type pressure regulating valves are available with a pressure range of 2 χ 320 bar. Inquire Now › 
am.3.vr… 
these pressure reducing valves ensure a minimum pressure variation on the p or a port with changing flow rate up to 90 l/min. Inquire Now › 
am.3.vs… 
the sequence valve are used to assure that a secondary circuit is pressurized when the setting pressure is reached. Inquire Now › 
am.3.xmp… 
modular valve type am.3.xmp... used together with the pressure proportional pilot type xp.3.. becomes a pressure control valve piloted by proportional command for rates up to 30 lt/min. the possibility of external drainage on a ensures its correct operation even with back pressure on the discharge side. other valves types should be ordered separately. Inquire Now › 
am.5.cp.. 
back pressure valves type am.5.cp are direct acting damped maximum pressure in-line valves fitted with bypass non-return valves. they are obtainable within the adjustable range 2 χ 250 bar. Inquire Now › 
am.5.h 
the 2 or 3 way pressure regulator type am.5.h ensures a constant set flow rate in the presence of varying system load (pressure) by keeping constant the pressure drop (dp =8 bar) in relation to the flow rate regulation. Inquire Now › 
am.5.qf 
am.5.qf type one way non-compensated throttle valve are fitted with an o-ring mounting plate which allows its assembly for either input or output regulation. Inquire Now › 
am.5.rgt.. 
this modular system produces a regenerative circuit to increasing the actuator (differential cylinder) exit speed as shown in the diagram. Inquire Now › 
am.5.sh 
modular valves type am.5.sh are actuator load pressure selecting units, as they are fitted with an integral shuttle valve cartridge which allows taking of the highest pressure signal to the external port via displacement of a ball. Inquire Now › 
am.5.vm/vi 
am.5.vm type pressure regulating valves are available within operating range 7 χ 350 bar. adjustment is by means of a grub screw or a plastic knob. Inquire Now › 
am.5.vr.. 
these pressure reducing valves ensure a minimum pressure variation on the p or a port with changing flow rate up 90 l/min. Inquire Now › 
am.5.vs.. 
the sequence valve are used to assure that a secondary circuit is pressurized when the setting pressure with a changing flow to up 90 l/min (see diagram). Inquire Now › 
am.66 
this is an intermediate block (am.66) for modular mounting of one or two flow rate regulators type qc.3... the flow regulator type qc.3.2... must be ordered separately. Inquire Now › 
am.7.qf  
am.7.qf type one way noncompensated throttle valve are fitted with an o-ring mounting plate which allows its assembly for either input or output regulation. adjustment is obtained by means of a grub screw. Inquire Now › 
am.7.up 
am.7.up type modular check valves allow free flow in one direction by lifting a seated poppet, while in the opposite direction the fluid can return by means of a small piston piloted by the other line pressure (piloted side). Inquire Now › 
am.88.. 
this is an intermediate block (am.88) for modular mounting of one or two compensated flow rate regulators qc.3... the flow regulator type qc32 must be ordered separately. Inquire Now › 
am3cp  
am3cp type back pressure valves are damped in-line direct acting pressure relief valves fitted with bypass non-return valves. Inquire Now › 
am3rd /sd  
am3rd and am3sd valves are direct acting spool type pressure reducing and sequencing units, respectively, with one end pre-loaded by means of a spring an the other end exposed to the hydraulic pressure. Inquire Now › 
am5ud 
am5ud type modular check valves allow free flow in one direction, while a conical seated poppet prevents flow in the opposite direction. Inquire Now › 
am5up 
am5up type modular check valves allow free flow in one direction by lifting a conical steel seated poppet, while in the opposite direction the fluid can return by means of a small piston piloted by the other line pressure (piloted side). Inquire Now › 
amita plastic check valves  
body valve: stabilized nylon 66 and 30% fiber glass flow control disc and spring: stainless steel aisi 316 seal ring: nbr threaded ends: uni iso 228 female opening pressure: min. 0,025 bar max. 0,035 bar Inquire Now › 
ba.130 
the low/high pressure groups are usually employed in hydraulic systems fed by dual pumps that form a single pressure circuit. Inquire Now › 
ball valve 3 ways mounting pad 
chrome plated brass body. seats in ptfe e fpm. gas threaded according to iso 228/1. pn 40, actuator connection according to iso 5211 Inquire Now › 
ball valve ff mounting pad 
chrome plated brass body seats in ptfe e fpm gas threaded according to iso 228/1 pn 40, full bore actuator connections according to iso 5211 and din 3337 Inquire Now › 
bc.2 
modular components Inquire Now › 
bc.3 bc.06 
modular components Inquire Now › 
bc.3... / bc.06… 
modular components for xq3 and xqp3 Inquire Now › 
bc.3... / bc.06… 
modular components for proportional regulators xq3 e xqp3 Inquire Now › 
bc.5 
modular components Inquire Now › 
bm.2 
multi station subplates Inquire Now › 
bm.3 
multi station subplates Inquire Now › 
bm.5 
multi station subplates Inquire Now › 
boachem fsa 
Inquire Now › 
boachem zxa/zya 
Inquire Now › 
boachem zxab/zyab 
Inquire Now › 
boa-compact 
Inquire Now › 
boa-compact ekb 
Inquire Now › 
boa-cve h / boa-cvp h 
Inquire Now › 
boa-h 
Inquire Now › 
boa-h/he/hv/hev 
Inquire Now › 
boa-r 
Inquire Now › 
boa-rvk 
Inquire Now › 
boa-s 
Inquire Now › 
boa-supercompact 
Inquire Now › 
boax-b 
Inquire Now › 
boax-sf 
Inquire Now › 
brass check valves one - pieced disassembleable check valve  
body valve in hot-forcing brass according to din 17660 seal ring: nbr threaded ends: uni iso 228 female gas minimum opening pressure: 0,04 bar Inquire Now › 
brass clapet brass swing check valves  
body valve and metallic parts: brass seal ring: nbr threaded ends: uni iso 228 female gas Inquire Now › 
brass gate valve 
full bore brass construction with acrylonytril stuffing box threaded connections according to iso 228/1 Inquire Now › 
bs.2 
single station subplates Inquire Now › 
bs.3 
single station subplates Inquire Now › 
bs.5 
single station subplates Inquire Now › 
bs5ria - bs5rga 
these special subplates, with relief valve, have integrated a regenerative circuit which disengages automatically with increasing load. Inquire Now › 
butterfly valves, wafer type, aisi 316 
mounting betweenflanges pn10/16 - ansi 150 lbs body, shaft, disc in aisi 316 stainless steel seal in ptfewith epdm backup ring stainless steel handle Inquire Now › 
c3v.00... 3way-2position 
these cartridge solenoid valves 3way-2position are suitable for off-highway machinery such as "power shift transmission control" applications with Inquire Now › 
c3v.05… 
these cartridge solenoid valves 3way-2position are suitable for offhighway machinery with low pressure performances and a great range of operating temperature. Inquire Now › 
cast iron ball check valves 
body valve: painted gg25 cast iron nuts and bolts: steel type 8.8 ball: resin seal rings: nbr Inquire Now › 
cast iron flanged check valves disc check valve  
body valve: painted gg25 cast iron flanged ends according to din 2501 pn 16 seal: nbr stem and guide: brass until dn 100 cast iron gg25 from dn 125 to dn 250 silent closing Inquire Now › 
ccp.20 
pressure compensator type ccp maintains a constant pressure drop (dp) regardless of downstream and up stream set pressure variation. Inquire Now › 
cd.3 
directional control stackable valve body is available in two different sizes: g3/8" or 9/16-18unf (sae 6). Inquire Now › 
cdc.3 
directional control stackable valve body is available in two different sizes: g3/8" or 9/16-18unf (sae 6). Inquire Now › 
cdl.04.6… 
the stackable circuit selector valves, type cdl.04.6, allows one single drive of 5 users with 4 elements connected in series. Inquire Now › 
cdl.06.6 
the stackable circuit selector valves, type cdl.06.6, allows one single drive of 6 users with 5 elements connected in series. Inquire Now › 
cdl.10.6… 
the stackable circuit selector valves, type cdl.10.6, allows one single drive of 6 users with 5 elements connected in series. Inquire Now › 
cdv.02.. 
the cartridge valve type cdv.02... mount a spool-type flow dividercombiner. this function allow to synchronize two hydraulic actuators in independent mode. Inquire Now › 
cep.s 
the electronic amplifier plug version was designed in compliance whit en 175301-803 (ex din43650), for direct mounting on the valve solenoid. the cep.s can used whit proportional valves xd.*.a..., xdp.*.a..., xp.3..., xqp.*..., cxq.3.. . Inquire Now › 
chromed brass check valve one - pieced disassembleable check valve  
body valve in hot-forcing brass according to din 17660 surface treatment: chroming seal ring: nbr threaded ends: uni iso 228 female gas minimum opening pressure: 0,04 bar adjustable nominal working pressure: Inquire Now › 
cls04 - logical cartridge automatic low back-pressure 
this logical one-way check valve guarantees an automatic unloading pressure in the hydraulic circuit (u to t) even to a low back-pressure on the “u” line, every time the flow through the p line stops. using this valve permits to reduce the hydraulic circuit’s costs and his typical application are the small/medium sissor-tables. Inquire Now › 
cm.3.m.. 
cm.3.m type pressure regulating valves are available with a pressure range of 1 χ 290 bar. Inquire Now › 
cm02.3.p. 
cm02.3.p type modular check stackable valves allow one way free flow by raising a conical shutter, while in the opposite direction the fluid can return by means of a small piston piloted by the pressure in the other line. Inquire Now › 
cmf04 - manual pressure control on the side 
the cmf valve unloads the hydraulic pressure by his lever in a progressive way (load sensibility). Inquire Now › 
cmp.02.. 
these direct action valves offer 2 important operational safety features for system in which they are used: 1) impossibility for the user to set pressure values higher than those specified in the catalogue by means a mechanical stop, 2) another internal mechanical stop prevents temporary closing of the p line because of peacks of pressure. Inquire Now › 
cmp.06.. 
these direct action valves offer 2 important operational safety features for the system in which they are used: 1) impossibility for the user to set pressure values higher than those specified in the catalogue by means of a mechanical stop 2) another internal mechanical stop prevents temporary closing of the p line because of peacks of pressure. Inquire Now › 
cmp.10.. 
these direct action valves offer 2 important operational safety features for the system in which they are used: 1) impossibility for the user to set pressure values higher than those specified in the catalogue by means of a mechanical stop (it is impossible to compress the spring completely) 2) another internal mechanical stop prevents temporary closing of the p line because of peacks of pressure. Inquire Now › 
cmp.20 
direct action pressure relief valves type cmp.20 are used to limit the maximum system pressure within their adjustable range (see diagram). Inquire Now › 
cmp.30 
these piloted action valves offer an important operational safety feature for the systems in which they are installed: impossibility for the user to set pressure values higher than those specified in the catalogue by means of a mechanical stop. Inquire Now › 
cmp04 - direct acting relief valve 
the cmp direct acting relief valves series permit to limit the pressure in the hydraulic circuit and are suitable for continuous duty with quick response times. cartridge in steel protected on surface by zinc plating. manual setting within the range shown in the diagram. Inquire Now › 
cmp04 - direct acting relief valve 
the cmp direct acting relief valves series permit to limit the pressure in the hydraulic circuit and are suitable for continuous duty with quick response times. cartridge in steel protected on surface by zinc plating. manual setting within the range shown in the diagram. Inquire Now › 
cmphr04 - max. high pressure valve with one-way check valve 
these direct action valves offer 2 important operational safety features for the system in which they are used: 1) impossibility for the user to set pressure values higher than those specified in the catalogue by means of a mechanical stop (it is impossible to compress the spring completely); 2) another internal mechanical stop prevents temporary closing of the p line because of peaks of pressure. Inquire Now › 
cmphr04 - max. high pressure valve with one-way check valve 
these direct action valves offer 2 important operational safety features for the system in which they are used: 1) impossibility for the user to set pressure values higher than those specified in the catalogue by means of a mechanical stop (it is impossible to compress the spring completely); 2) another internal mechanical stop prevents temporary closing of the p line because of peaks of pressure. Inquire Now › 
cmpr04 - max. pressure valve with one-way check valve 
these direct action valves offer 2 important operational safety features for the system in which they are used: 1) impossibility for the user to set pressure values higher than those specified in the catalogue by means of a mechanical stop (it is impossible to compress the spring completely); 2) another internal mechanical stop prevents temporary closing of the p line because of peaks of pressure. Inquire Now › 
cmpr04 - max. pressure valve with one-way check valve 
these direct action valves offer 2 important operational safety features for the system in which they are used: 1) impossibility for the user to set pressure values higher than those specified in the catalogue by means of a mechanical stop (it is impossible to compress the spring completely); 2) another internal mechanical stop prevents temporary closing of the p line because of peaks of pressure. Inquire Now › 
cobra-sgp/sgo/sgf 
Inquire Now › 
cpe04 - manual emergency valve 
the valves of “cpe” series permit an emergency manual intervention. the valves are a double directional normally closed valve. the release is obtained by pushing the bottom. the valves are made completely in steel and are protected on surface by zinc plating. Inquire Now › 
cpm04 - hand pump 
the 3/4-16unf “cpm” cartridge pumps are available in 1cc and 2 cc / stroke versions. normally used as manual emergency for small systems. steel cartridge and body in die cast aluminium. Inquire Now › 
crd.03. 
these direct cartridge solenoid check valves are suitable for off-highway machinery with low pressure performances and a great range of operating temperature. Inquire Now › 
crd04 - direct operated cartridge solenoid valve 
the “crd04” series consist in 2 way/2 position direct operated cartridge solenoid valves. sealing in both directions is guaranteed by a tapped poppet. the valves are supplied with plastic dc coils while for application in ac coil must be required the r1 variant (rectifier incorporated). Inquire Now › 
cri04 - one-way check valve 
the check-valves permit one-directional oil flow only. on the opposite side the sealing is guaranteed by a ball steel poppet. the spring permits an easy valve installation in any position. external steel body protected on surface by zinc plating. Inquire Now › 
crp04 - piloted operated cartridge solenoid valve 
the electrical valves of the “crp04” series, are electrically controlled, 2-way/2-position directional valves. sealing from “a” to “b” is guaranteed by a tapered poppet. free passage from “b” to “a” is only allowed with the coil de-energised. the normally closed valves can work with the coils in dc or ac. the normally open valves work with coils in dc while for applications in ac rac coils must be used with a connector with built-in rectifier. Inquire Now › 
crp04x - elettrovalvole conformi alla direttiva atex 94/9/ce 
the ep and mp series of electric pumps are simple power unit composed by dc motor and gear pump, usefull where the filled circuit is far from the the power unit. Inquire Now › 
cru04 - one-way check valve 
the check-valves permit one-directional oil flow only. on the opposite side the sealing is guaranteed by a hardened and ground taper steel poppet. the spring permits an easy valve installation in any position. external steel body protected on surface by zinc plating. Inquire Now › 
csb04 - bidirectional not compensated flow control valve 
the valves of csb series permit the flow control by means of a non-compensated restriction. the restriction is possible in both direction and the regulation is obtained by turning to the left or right the screw or the hand wheel. the valves are made completely in steel and are protected on surface by zinc plating. a high degree of mechanical sealing is ensured along with negligible leakage. Inquire Now › 
csc04 - unidirectional compensated flow control valve 
the csc valves controls the flow in one direction only, maintaining it constant regardless of oil pressure. the restricting action is possible by turning the hand wheel to the right or left present with a set screw. the valves are made entirely in steel externally protected by zinc planting. Inquire Now › 
cve.06.. 
these pressure reducing valves ensure a minimum pressure variation on the p or a port with changing flow rate up to 20 l/min. Inquire Now › 
cx.3 
cx.3.a../cx.3.c.. series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. Inquire Now › 
cxq.3… 
the open loop proportional flow regulator 3 way compensated with priority function is designed to regulate flow in proportion to an applied electrical current (rem or se3an power amplifier). Inquire Now › 
danais 150 
Inquire Now › 
danais mt ii 
Inquire Now › 
double disc wafer check valve 
pn 25 completely in aisi 316 stainless steel bearings in ptfe seal in fpm mounting between flanges Inquire Now › 
ecoline blc 1000 
Inquire Now › 
ecoline blt 150-300 
Inquire Now › 
ecoline gl 150-600 
Inquire Now › 
ecoline gl 800 
Inquire Now › 
ecoline gt 150-600 
Inquire Now › 
ecoline gt 800 
Inquire Now › 
ecoline sc 800/pt 800 
Inquire Now › 
ecoline-sc 150-600/pt150-600 
Inquire Now › 
fe02.3.. 
module units fe10.3... provide pressure relief valve with adjustable pressure setting ranges. Inquire Now › 
fe10.3.. 
module units fe10.3... provide pressure relief valve with adjustable pressure setting ranges. Inquire Now › 
fe10.p.. 
module units fe10.3... provide a pressure relief valve with adjustable pressure setting ranges and an electrical venting valve. Inquire Now › 
fe10ls.3… 
module units fe10ls.3... provide pressure relief valve with adjustable pressure setting ranges. Inquire Now › 
ff and mf cut-off ball valves  
chrome plated brass body gas threaded according to iso 228/1 seats in ptfe or in fpm Inquire Now › 
ff brass ball valves female-female brass full bore ball valves  
body valve: (chromed) hot-forcing brass according to din 17660 ball seats: ptfe o-ring : nbr threaded ends : gas female according to uni iso 228 nominal working pressure: 25 bar working temperature: -25°c - +180°c availabe sizes: from 1/4" to 2" Inquire Now › 
globe 2p stainless steel 2 pieces full bore ball valves  
body valve: stainless steel aisi 316 ball seats: ptfe + 15% glass fiber o-ring stem: fpm threaded ends according to uni iso 7/1 nomi nal working pressure: 63 bar working temperature: -25°c - +180°c Inquire Now › 
globe 2p for actuator stainless steel 2 pieces full bore ball valves with direct actuator installation and locking system  
full bore ball valve 2 pcs direct actuator installation iso 5211 body valve: stainless steel aisi 316 ball seats: ptfe + 15% glass fiber o-ring stem: fpm threaded ends according to uni iso 7/1 nominal working pressure: 63 bar Inquire Now › 
globe 3 ways 3 pieces reduced bore ball valves with locking system  
body valve: stainless steel aisi 316 .”l” or “t” ball configuration ball seats: ptfe + 15% glass fiber o-ring stem: ptfe Inquire Now › 
glovalve ball check valves  
manufacturing process: pressed stainless steel body valve and metallic parts in stainless steel aisi 316 ball: nbr or fpm covered aluminium seal ring: nbr threaded ends: uni iso 228 female Inquire Now › 
hera bd 
Inquire Now › 
hl he hf gb series - bell housing and couplings 
the bell housings of the hl series and the couplings of the he - hf and gb series are utilised in the construction of hydraulic power packs and serve for coupling hydraulic pumps to unel-iec standardised electric motors with powers of up to 132 kw. Inquire Now › 
hpv41 proportional directive valves 
optimised performances and integration of the greatest number of functions are the objectives planned and achieved through the development of the hpv valves, a range of the latest generation of proportional directional valves that perform two simultaneous functions: directional control and flow control that is unaffected by load variations. their operation is based on the proportional hydraulic principle, i.e. keeping pressure loss constant through a variable section. Inquire Now › 
hpv41 proportional directive valves 
optimised performances and integration of the greatest number of functions are the objectives planned and achieved through the development of the hpv valves, a range of the latest generation of proportional directional valves that perform two simultaneous functions: directional control and flow control that is unaffected by load variations. Inquire Now › 
hpv77 proportional directive valves 
optimised performances and integration of the greatest number of functions are the objectives planned and achieved through the development of the hpv valves, a range of the latest generation of proportional directional valves that perform two simultaneous functions: directional control and flow control that is unaffected by load variations. Inquire Now › 
hpv77 proportional directive valves 
optimised performances and integration of the greatest number of functions are the objectives planned and achieved through the development of the hpv valves, a range of the latest generation of proportional directional valves that perform two simultaneous functions: directional control and flow control that is unaffected by load variations. their operation is based on the proportional hydraulic principle, i.e. keeping pressure loss constant through a variable section. Inquire Now › 
hydraulic fittings 
in this database we met various types of fittings in order to facilitate consultation and choice of components. you can download the catalog in pdf format or consult the database products for search by type. the data reported in the catalogue are indicative, orders and technical specifications require confirmation to our offices. Inquire Now › 
idrja antipollution checkable model  
body valve and metallic parts in stainless steel aisi 304 seal ring: fpm Inquire Now › 
idrja female - male for air feeder 
body valve and metallic parts in stainless steel aisi 304 seal ring: nbr connection for air feeder: threaded 3/8” female on suction side available sizes: from 1” to 2” Inquire Now › 
idrja flanged model 
body valve and metallic parts in stainless steel aisi 304 or aisi 316 seal ring: fpm flanged ends: flanges fabricated from pressed stainless steel with holes according to uni 2278 pn 16 available sizes: from dn 50 to dn 100 Inquire Now › 
idrja for drinkable water 
body valve and metallic parts in stainless steel aisi 304 seal ring: epdm with wras or equivalent approval Inquire Now › 
idrja male - female  
body valve and metallic parts in stainless steel aisi 304 seal ring: fpm Inquire Now › 
idrja standard 
manufacturing process: pressed stainless steel body valve and metallic parts in stainless steel aisi 304 or aisi 316 seal ring: nbr, fpm or ptfe Inquire Now › 
idrja with npt threads 
body valve and metallic parts in stainless steel aisi 304 seal ring: fpm threaded ends: npt according to ansi b 1.20.1 available sizes: from 3/4” to 2” Inquire Now › 
idrja with reinforced pin 
body valve and metallic parts in stainless steel aisi 304 seal ring: fpm flow control disc: stainless steel aisi 316 Inquire Now › 
iso f14 a/ac 
Inquire Now › 
iso f14d ball valve 
Inquire Now › 
iso vu ball valve 
Inquire Now › 
isoria 10 
Inquire Now › 
isoria 16 
Inquire Now › 
isoria 20 
Inquire Now › 
isoria 25 
Inquire Now › 
jc.3.d… 
this is a rugged joystick with single axis y potentiometer and ergonomic handle. Inquire Now › 
jc.5.d… 
this is a rugged joystick with potentiometer and ergonomic handle.the joystick has a spring return lever for center position. Inquire Now › 
jcf.d… 
developed for applications where ergonomics and system integrity are paramount, the jcfd is a compact, low profile joystick that provides precise fingertip control. designed for use with an electronic controller, the plastic track generates analogue and switched reference signals, proportional to the distance and direction over which the handle is moved. Inquire Now › 
jmpei/jmpiu joysticks 
the possibility to use a joystick with integrated electronics, allows avoiding bulky systems and reduces costs, to be more competitive on the market. jmpei - jmpiu are compact and rugged single axis joysticks, developed for use in those applications where fine control and handle functionality are paramount. Inquire Now › 
jmpei/jmpiu joysticks 
the possibility to use a joystick with integrated electronics, allows avoiding bulky systems and reduces costs, to be more competitive on the market. jmpei - jmpiu are compact and rugged single axis joysticks, developed for use in those applications where fine control and handle functionality are paramount. Inquire Now › 
ke 
Inquire Now › 
kra.16/25… 
this valve series is used in those applications where monitoring of the "actual" valve position is required for managing machine safety cycles as required by current accident prevention legislation. Inquire Now › 
le variants 
the emergency control lever for solenoid valves by aron, represents a develop in terms of safety and flexibility among applied hydraulic components. Inquire Now › 
mc series - mini power packs group 1 pumps 
the mc series of mini power packs are designed to provide a rational, economical and flexible solution in the majority of applications where this device is used. the mc2 version is designed to move single-acting cylinders. the mc4 version is designed to move single- and double-acting cylinders, utilising stackable blocks for cetop 3. Inquire Now › 
mc series - mini power packs group 1 pumps 
the mc series of mini power packs are designed to provide a rational, economical and flexible solution in the majority of applications where this device is used. the mc2 version is designed to move single-acting cylinders. the mc4 version is designed to move single- and double-acting cylinders, utilising stackable blocks for cetop 3. Inquire Now › 
mf ball angle valve with 2 pieces union 
chrome plated brass body gas threaded according to iso 228/1 butterfly handle Inquire Now › 
mh series - power packs group 2 pumps 
the mh series of power packs represent the expansion of the mc power pack range, offering higher flow rates and powers. this project follows the same idea of modularity as the smaller power packs, where part of the circuit is in the flange block on which the pump and motor are mounted in form b5. Inquire Now › 
mh series - power packs group 2 pumps 
the mh series of power packs represent the expansion of the mc power pack range, offering higher flow rates and powers. this project follows the same idea of modularity as the smaller power packs, where part of the circuit is in the flange block on which the pump and motor are mounted in form b5. Inquire Now › 
miniglobe one piece reduced bore ball valves  
body valve: stainless steel aisi 316 ball seats: ptfe o-ring: nbr threaded ends according to uni iso 7/1 nominal working pressure: 63 bar working temperature: -25°c - +180°c available sizes: from 1/4" to 1 Inquire Now › 
mk series - mini power packs group 1 pumps for dock leveller 
the mk series of mini power packs are designed to provide a compact, economical and reliable solution for specific applications such as dock levellers. Inquire Now › 
mk series - mini power packs group 1 pumps for dock leveller 
the mk series of mini power packs are designed to provide a compact, economical and reliable solution for specific applications such as dock levellers. Inquire Now › 
ml b rd series - speed increasers and reduction gears 
the gearboxes of the ml and b series are used mainly for connecting hydraulic pumps to the power take-offs of agricultural tractors. pto output, standardised at either 540 or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps. parallelly, for the hydraulic pumps, the rd series of gear motors is used to reduce hydraulic motor revs. Inquire Now › 
mr series - micro power packs group 05 pumps 
the mr series of micro power packs are ideal for use in applications where compact size and reduced flow rates are required, designed primarily for operating 1 single-acting cylinder but with the possibility of multiple drives using stackable blocks. Inquire Now › 
mr series - micro power packs group 05 pumps 
the mr series of micro power packs are ideal for use in applications where compact size and reduced flow rates are required, designed primarily for operating 1 single-acting cylinder but with the possibility of multiple drives using stackable blocks. Inquire Now › 
mr. 
mr.7... in line - mra.7... at 90° - this in-line mounting shut-off is completely steel made and allows for operating pressure of up to 400 bar. its uses is essential to protect measuring gauge in the eventuality of fluid hammer. Inquire Now › 
mw series - reversible power pack 
the mw series of reversible micro power packs with reversible pump are designed to operate 1 double-acting cylinder, exploiting reversibility only in the direction the motor is turning and where compact size, reliability and reduced flow rates are the features required by the application. Inquire Now › 
mw series - reversible power pack 
the mw series of reversible micro power packs with reversible pump are designed to operate 1 double-acting cylinder, exploiting reversibility only in the direction the motor is turning and where compact size, reliability and reduced flow rates are the features required by the application. Inquire Now › 
nori 160 rxl/rxs 
Inquire Now › 
nori 160 zxl/zxs 
Inquire Now › 
nori 160 zxlf/zxsf 
Inquire Now › 
nori 320 rxl/rxs 
Inquire Now › 
nori 320 zxlf/zxsf 
Inquire Now › 
nori 320 zxsv 
Inquire Now › 
nori 40 fsl/fss 
Inquire Now › 
nori 40 rxl/rxs 
Inquire Now › 
nori 40 zxl/zxs 
Inquire Now › 
nori 40 zxlb/zxsb 
Inquire Now › 
nori 40 zxlbv/zxsbv 
Inquire Now › 
nori 40 zxlf/zxsf 
Inquire Now › 
nori 40 zylb/zysb 
Inquire Now › 
nori 500 rxlr/rxsr 
Inquire Now › 
nori 500 zxlr/zxsr 
Inquire Now › 
nori 500 zxsv 
Inquire Now › 
oil bathed motor power units “cmi” series 
the most important characteristics of these power units is the motor-pump set completely bathed in the oil inside the tank. this version is offering the following advantages compared with the external motor one: - reduced dimensions especially the height so that the unit is extremely compact - high use of the motor power thanks to cooling capacity of the oil Inquire Now › 
oil bathed motor power units “cmi” series 
the most important characteristics of these power units is the motor-pump set completely bathed in the oil inside the tank. this version is offering the following advantages compared with the external motor one: - reduced dimensions especially the height so that the unit is extremely compact - high use of the motor power thanks to cooling capacity of the oil Inquire Now › 
pn20 brass gate valve 
full bore brass construction with acrylonytril stuffing box threaded connections according to iso 228/1 Inquire Now › 
power units 
the oleodinamica reggiana power units have been realized for medium-high flows with a great versatility tied to the customers requirements.it is possible to integrate the motor-pump set with valves blocks realized according to functional and over-all dimensions specifications to obtain hydraulic circuit suitable for movimentation and automation of the most complex machines. Inquire Now › 
power units 
the oleodinamica reggiana power units have been realized for medium-high flows with a great versatility tied to the customers requirements.it is possible to integrate the motor-pump set with valves blocks realized according to functional and over-all dimensions specifications to obtain hydraulic circuit suitable for movimentation and automation of the most complex machines. Inquire Now › 
psa ball valve khg 
Inquire Now › 
psa ball valve khg-m 
Inquire Now › 
pvr.3-pvr.3u / pvs.3-pvs.3u 
these subplate mounting piloted type pressure reducing and sequencing valves ensure a minimum variation in their calibrated pressure value with changing flow rate. Inquire Now › 
pvr.5 - pvr.5.u/pvs.5 - pvs.5.u 
these subplate mounting piloted type pressure reducing and sequencing valves ensure a minimum variation in their calibrated pressure value with changing flow rate. Inquire Now › 
qc.3.2… 
these qc.3.2... compensated flow rate regulators are designed to control and maintain a constant irrespective of the pressure variations upstream and downstream of the regulation section. Inquire Now › 
qc.3.3 
this regulator type can be used whenever it is necessary to obtain a constant fluid flow irrespective of the pressure variations present upstream or downstream Inquire Now › 
qfb..  
two-way adjustable flow regulating type qfb.. allow flow in both directions. their operation depends on the fluid pressure and viscosity. Inquire Now › 
qfsu / qfsb 
two-way adjustable flow regulating valves type qfsu / qfsb allow flow in both directions. their operation depends on the fluid pressure and viscosity. Inquire Now › 
qfu..  
one-way adjustable flow regulating type qfu.. allow free flow in one direction by means of a check valve while controlling it in the opposite direction. their operation depends on the fluid pressure and viscosity. Inquire Now › 
rem.d 
the electronic control card type rem.d.ra has been designed to drive the aron double solenoid proportional valves series “xd.*.c...and xdp.3.c” without integral position transducer.the control card is enclosed in an “undecal” type housing, a typical relay mounting standard. the output stage operates on the pulse width modulation principle (p.w.m.) and is provided with current feedback in order to obtain a solenoid output current proportional to the reference input signal. Inquire Now › 
rem.s 
the electronic control card type rem.s.ra has been designed to drive the “xd.*.a, xdp.3.a, xp.3, xq.3, xqp.*. and cxq.3” series aron single solenoid proportional valves without integral sition transducer. the control card is enclosed in an “octal” type housing, a typical relay mounting standard. the output stage operates on the pulse width modulation principle (p.w.m.) and is provided with current feedback in order to obtain a solenoid output current proportional to the reference input signal. output short circuit and supply polarity inversion protection is provided. Inquire Now › 
rgs 
Inquire Now › 
se.3.an21.00 
the electronic cards type se.3.an.21.00... have been planned for controlling double solenoid proportional valves of the series xd.3...xdp.3…which do not incorporate the position transducer. Inquire Now › 
se.3.an21.rs ... serie 3  
the electronic cards type se.3.an.21.rs...serie 3 have been planned for controlling single and double solenoid proportional valves xdc3....serie 2 equipped with position transducer type lvdt. Inquire Now › 
se.mnc 
the se.mnc... electronic control card is fitted with one or two proportional outputs with current feedback for valve control (xqp3, cxq3 ) and numerous on/off outputs for controlling the solenoid in directional valves. Inquire Now › 
se3ln3... serie 4 
the category 3 safety electronic card was planned to permit automatic adjustment of the “boats “ of mobile aerial platforms. maintenance of the horizontal position is guaranteed independently from the geometrical configuration of the platform’s articulated arms and of the variation of inclination of the machine with respect to the base plane, complying to the normative in force of the control systems bound to en 954-1 safety. Inquire Now › 
serie 2000 pn 16 
Inquire Now › 
serie fp - minicentrale idraulica 
the fp series power pack is an easy to assemble compact electro-hydraulic unit. the features of versatility and modularity make it possible to obtain many hydraulic circuit combinations for various plant design requirements. this catalogue has been written to help the user choose the power pack components to be used in his/her application. Inquire Now › 
serie fp - minicentrale idraulica 
the fp series power pack is an easy to assemble compact electro-hydraulic unit. the features of versatility and modularity make it possible to obtain many hydraulic circuit combinations for various plant design requirements. this catalogue has been written to help the user choose the power pack components to be used in his/her application. Inquire Now › 
sh03… 
shuttle type cartridge valves sh03... allow taking of the highest pressure signal to the external port via displacement of ball. there are usually employed to signal the actuator load to a load sensing pump pressure compensator. Inquire Now › 
sicca 150-600 glc 
Inquire Now › 
sicca 150-600 gtc 
Inquire Now › 
sicca 150-600 scc 
Inquire Now › 
sicca 800-1500 gtf 
Inquire Now › 
sicca 800-2500 glf 
Inquire Now › 
sicca 800-2500 pcf 
Inquire Now › 
sicca 900-2500 glc 
Inquire Now › 
sicca 900-2500 gtc 
Inquire Now › 
sicca 900-2500 scc 
Inquire Now › 
sisto-10 
Inquire Now › 
sisto-10m 
Inquire Now › 
sisto-10s 
Inquire Now › 
sisto-16 
Inquire Now › 
sisto-16rga 
Inquire Now › 
sisto-16s 
Inquire Now › 
sisto-16twa 
Inquire Now › 
sisto-20 
Inquire Now › 
sisto-c 
Inquire Now › 
sisto-kb 
Inquire Now › 
sisto-rsk 
Inquire Now › 
sisto-rsks 
Inquire Now › 
small antipollution checkable model in conformity with uni en 1717 (type ea)  
body valve and metallic parts in stainless steel aisi 304 seal ring: fpm inspection hole: threaded 1/8” male on suction side available sizes: 1/2” Inquire Now › 
small for drinkable water in conformity with uni en 1074-3  
body valve and metallic parts in stainless steel aisi 304 seal ring: epdm with wras or equivalent approval working temperature: -20°c - +110°c Inquire Now › 
small standard threaded small diameter check valves  
manufacturing process: machined/pressed stainless steel body valve and metallic parts in stainless steel aisi 304 or aisi 316 seal ring: nbr or fpm Inquire Now › 
small with reinforced pin for use with gas or steam  
body valve and metallic parts in stainless steel aisi 304 seal ring: fpm flow control disc: stainless steel aisi 316 Inquire Now › 
ss clapet stainless steel swing check valves  
body valve and metallic parts: stainless steel aisi 316 seal ring: ptfe threaded ends according to uni iso 7/1 nominal working pressure: 16 bar Inquire Now › 
ss faucets one piece reduced bore ball faucets  
body: stainless steel aisi 316 ball seats: ptfe o-ring: nbr Inquire Now › 
ss floating valves full bore floating valves  
body valve and metallic parts: stainless steel aisi 316 threaded end: gas male according to uni iso 7/1 Inquire Now › 
ss sight glasses  
body: stainless steel aisi 316 gasket: ptfe threaded ends: gas female Inquire Now › 
staal 100 akd/akds 
Inquire Now › 
staal 100 akk/akks 
Inquire Now › 
staal 40 akd/akds 
Inquire Now › 
staal 40 akk/akks 
Inquire Now › 
su im series - clutch and belt supports 
the supports of the su series are used to drive hydraulic pumps and transmit the motion of hydraulic motors where there are strong radial and axial loads. the mechanical clutches of the im series and the electromagnetic ones of the ie series also have the function of driving pumps and transmitting the motion of hydraulic motors but they allow their disengagement if they are not used, which ensures against premature wear of all the control and transmission elements. Inquire Now › 
svp 
the svp electronic amplifier with current feedback current is designed to control a pump with variable flow rate or two pumps for open circuit or two motors. the amplifier has two proportional outputs with current feedback and a single power output without current feedback. Inquire Now › 
t-vsc… 
they are flow regulated compensated with fixed setting valves. they keep constant flow independently from oil pressure. they keep constant down speed independently from load value. Inquire Now › 
v.m.p - v.s.p - v.u.p/v.l.p - v.l.p - v.l.p 
these pressure control valves are available in the basic vmp* maximum pressure, vsp* sequence and vup* exclusion versions, with a single pressure value and three calibration ranges that cover the band 15 χ 400 bar. Inquire Now › 
vam04 - single-phase motor start valve 
the vam04 valve allows the single-phase motor start without load, delaying the pump pressure. Inquire Now › 
vams04 - soft start valve 
this valve is used on hydraulic power packs delay actuator start up. it is housed directly on the gr1 pump’s auxiliary pressure inlet and are combined with dc or single phases ac motors. Inquire Now › 
vcdf06 - flow compensated force valve 
the vcdf are flow regulated compensated with setting valves. they keep constant flow independently from oil pressure. they keep constant down speed independently from load value. Inquire Now › 
vd.40 
these valves are used as cam controlled unidirectional flow regulators. normally mounted in line between actuator and directional valve for the displacement of carriages or slides, they enable cam controlled acceleration or deceleration of the moving mass. Inquire Now › 
vmp.10 
the maximum pressure valves vmp10 are direct actions units. their use is essential for the limitation of hydraulic system pressure. Inquire Now › 
vmp12 - pilotated acting relief valves 
the pilotated acting relief valves series “vmp12” permit to limit the pressure in the hydraulic circuit and are suitable for continuos duty with quick response times. high resistance aluminium body. cartridge in steel protected on surface by zinc plating. Inquire Now › 
vmp20...  
the maximum pressure valves vmp20... are direct action units. their use essential for the limitation of hydraulic system pressure. Inquire Now › 
vp.. 
one-way check valves type vp.. are mounted directly onto the cylinder ports to prevent uncontrolled load drop in case of hydraulic system failure. Inquire Now › 
vpf - vpm 
one-way check valves type vp.. are mounted directly onto the cylinder ports to prevent uncontrolled load drop in case of hydraulic system failure. Inquire Now › 
vrd.. 
piloted double check valves type vrd.. can be hydraulically unblocked via an internal small piloting piston. they are used in those hydraulic systems where it is necessary to block an actuator and to make would tend to modify its position. Inquire Now › 
vrs.. 
direct simple piloted check valves type vrs.. allow free flow in one direction but by using their external piloting feature it is also possible to obtain fluid flow in the direction opposite to that of the free flow. Inquire Now › 
vsc04 - fixed pressure compensated flow control valve 
the vsc valves of series are pre-set pressure compensated flow control valves. they maintain a constant flow independent of load induced pressure. Inquire Now › 
vt series - mini power packs group 1 pumps with integrated cartdridge valves 4 way 
the vt series of mini power packs are designed to provide a compact, economical and reliable solution for moving double-acting cylinders, utilising cartridge valves incorporated in the base flange without the use of external blocks. Inquire Now › 
vt series - mini power packs group 1 pumps with integrated cartdridge valves 4 way 
the vt series of mini power packs are designed to provide a compact, economical and reliable solution for moving double-acting cylinders, utilising cartridge valves incorporated in the base flange without the use of external blocks. Inquire Now › 
vts 
Inquire Now › 
wafer disck check valves (single disc)  
body valve, disc and spring in stainless steel aisi 316 assembly between flanges din pn 16/40 and ansi 150 nominal working pressure: 40 bar installation: horizontal, vertical or inclined flow available sizes: from 1/2" to 4" Inquire Now › 
wafer 1 pc full bore ball valve 
pn 25 completely in aisi 316 stainless steel seals in ptfe + 15% fv direct mounting iso 5211 from 1” Inquire Now › 
wafer swing check valve 
pn 16 valve body and disc in aisi 316 or in fpm mounting between flanges Inquire Now › 
xd.3.a../xd.3.c. 
xd.3.a../xd.3.c.. series valves are used for controlling fluid direction and flow rate as a function of the supply current to the proportional control solenoid. Inquire Now › 
xdc.3... serie 1 
the valves xdc...serie 1 control the direction and the volume of the flow according to the feeding current to the proportional solenoid. the position transducer type ldvt (inductive position transducer) monitors the actual position of the spool. Inquire Now › 
xdc.3... serie 2 
the valves xdc serie 2 control the direction and the volume of the flow according to the feeding current to the proportional solenoid. the position transducer type ldvt (inductive position transducer) monitors the actual position of the spool. Inquire Now › 
xdp.3 
the open loop valves of series xdp... control the direction and the volume of the flow according to the feeding current to the proportional solenoid. Inquire Now › 
xdp.5 
the open loop valves of series xdp control the direction and the volume of the flow according to the feeding current to the proportional solenoid. Inquire Now › 
xp.3.. 
proportional maximum pressure valves type xp.3.*.. are used to regulate a hydraulic circuit pressure by means of a variable electric signal. their precise implementation allows for high and constant operational standard up to a maximum 2,5 l/min flow rate. a manually pressure limit setting version is also available, to protect the system from uncontrolled electrical signals. Inquire Now › 
xq.3 
this is a proportional valve where both the flow rate and pressure control flow functions have been integrated according to the 3 way regulation concept.the interface uni iso 4401 - 03 - 02 - 0 - 94 standard (ex cetop r 35 h 4.2-4-03) allows for direct mounting on modular block or multiple sub-bases, which makes possible many advantageous and extremely compact application solution as a consequence of their simplicity of installation. Inquire Now › 
xqp.3 
the open loop proportional flow regulator is 2 and 3 way compensated with priority function. it is designed to regulate flow in proportion to an applied electrical current . flow regulation is load independent - b port. load compensation is achieved by a spool compensator which holds the pressure drop constant across the proportional spool. Inquire Now › 
xqp.5 
the open loop proportional flow regulator is 2 and 3 way compensated with priority function. it is designed to regulate flow in proportion to an applied electrical current. flow regulation is load independent - b port. load compensation is achieved by a spool compensator which holds the pressure drop constant across the proportional spool. Inquire Now › 
zjsva/zsxva 
Inquire Now › 
zrs 
Inquire Now › 
zts 
Inquire Now › 
Business type
Business Location




About us
Contact us now Tel +39 0805367090
Send us a Fax +39 0805367091
Send us an email info@tecnicaindustriale.com
Tecnica Industriale Srl
S.P. 231 Km 1,110 - 70026 Modugno (Ba) - Italy
  © 2008 Tecnica Industriale Srl. All rights reserved. Vat N. 00324840727. Created by www.omnilink.it 
Tecnica Industriale Srl
all industrial products
global industrial supplies
www.tecnicaindustriale.it